High definition Pneumatic Textile Sample Cutter - YY216A Optical Heat Storage Tester For Textiles – Yueyang

Used for testing the light heat storage properties of various fabrics and their products. The xenon lamp is used as the irradiation source, and the sample is placed under a certain irradiance at a specified distance. The temperature of the sample increases due to the absorption of light energy. This method is used to measure the photothermal storage properties of textiles.

《Test method for optical heat storage of textiles》

1.Large screen color touch screen display operation. Chinese and English interface menu operation.
2.With imported xenon lamp lighting system.
3. With high precision imported temperature sensor.
4.The test process has preheating time, light time, dark time, xenon lamp irradiance, sample temperature, environmental temperature automatic measurement display.
5. In the test, the temperature change of the sample and the environment over time is automatically recorded. The xenon lamp is automatically turned off when the preset lighting time reaches, and the maximum temperature rise and average temperature rise are automatically calculated. The computer automatically draws the time-temperature curve.
6. Report storage test data, automatic statistics test maximum value, minimum value, average value, mean square deviation, CV% coefficient of variation, equipped with printing interface, online interface.

1.Temperature rise value test range: 0 ~ 100℃, the resolution of 0.01 ℃
2. The average temperature rise value test range: 0 ~ 100℃, the resolution of 0.01 ℃
3. Xenon lamp: spectral range (200 ~ 1100) nm in the vertical distance of 400mm can produce (400±10) W/m2 irradiance, illuminance can be adjusted;
4. Temperature sensor: accuracy of 0.1℃;
5. Temperature recorder: can continuously record the temperature of every 1min (temperature recording time interval set range (5S ~ 1min));
6. Irradiance meter: measuring range (0 ~ 2000) W/m2;
7. Timing range: lighting time, cooling time setting range of 0 ~ 999min, precision is 1s;
8. The sample table and xenon lamp vertical distance (400±5) mm, the temperature sensor is in the center of the sample below the sample, and can be fully in contact with the sample;
9. The external size: length 460mm, width 580mm, high 620mm
10. Weight: 42Kg
11.Power supply: AC220V, 50HZ, 3.5KW (need to support 32A air switch)