Paper&Flexible Packaging Testing Instruments
-
YYP2000-D Ink Mixer
Ink Mixer Introduction:
In order to meet the market demand and meet the higher requirements of customers, the company
has designed and produced a new generation of YYP2000-D mixer. Simple and convenient operation;
Low speed, intermittent agitation on the side of the barrel; Unique mixing paddle design, the ink can be turned and cut during the mixing process, and the ink can be thoroughly mixed within ten minutes; The stirred ink does not heat up. Convenient refuelling bucket, (stainless steel bucket); Mixing speed can be regulated by frequency conversion.
-
YYP30 UV Light Attachment
Technology Parameter
Single phase three lines 220VAC ~ 50Hz
OVERALL POWER
2.2KW
GROSS WEIGHT
100kg
EXTERIOR SIZE
1250L*540W*1100H
ENTER SIZE
50-100mm
CONVEYOR BELT
STAINLESS STEEL
BELT
CONVEYOR BELT SPEED
1-10m/min
UV LAMP
HIGH PRESSURE
MERCURY LAMP
CONVEYOR BELT WIDTH
300mm
COOLING MANNER
AIR COOLING
2KW*1PC
-
YYP225A Printing INK Proofer
Technical Parameters:
Model YYP225A Printing INK Proofer Distributing Mode Automatic Distributing (Distributing Time adjustable) Printing Pressure Printing Pressure can be precisely adjusted according to the thickness of the printing material from outside Major Parts Use Famous Brands of the World Distributing and Printing Speed Distributing and printing speed can be adjusted by shift key according to the properties of ink and paper. Size 525x430x280mm Printing Roller Total Length Total Width:225mm (The maximum spread are is 225mmx210mm Color Strip area and Effective area Color Strip area/Effective area: 45×210/40x200mm (four strips)
Color Strip area and Effective area Color Strip area/ Effective area: 65×210/60x200mm (three strips)
Total Weight About 75 KGS -
YY ST05B Five Point Heat Seal Gradient Tester
Introductions:
The heat seal tester is a necessary laboratory instrument for food enterprises, pharmaceutical enterprises, daily chemical products enterprises, packaging and raw material production enterprises.
Its working conditions simulate the pressure, temperature and time of the packaging line in the packaging process of the packaging line. Through the instrument, the material can be quickly assessed and can be used in the production line after the assessment. Another use is to heat seal the flexible packaging material under the set temperature, pressure and time, so as to conveniently and quickly
find the best heat of the material
Sealing process parameters to meet the requirements of packaging and packaging material manufacturers for the best heat sealing parameters of materials.
II.Meeting Standard:
QB/T 2358（ZBY 28004）、 ASTM F2029、YBB 00122003
-
YY6-Light 6 Source Color Assessment Cabinet（4 Foot)
- Lamp Cabinet Performance
- Hepachromic artificial daylight acknowledged by CIE, 6500K color temperature.
- Lighting scope: 750-3200 Luxes.
- Background color of light source is Neutral Grey of absorbance.In using lamp cabinet, prevent outer light from projecting on article to be checked. Don`t place any unconcerned articles in the cabinet.
- Making metamerism test.Through microcomputer, the cabinet can switch between different light sources in very short time to check color difference of goods under different light source. When lighting up, Prevent lamp from flashing as home fluorescent lamp is lighted.
- Correctly record use time of each lamp group. Especially D65 standar dlamp shall be replaced after being used for over 2,000 hrs, avoiding error resulted from aged lamp.
- UV light source for checking articles containing fluorescent or whitening dye, or be used to add UV to D65 light source.
- Shop light source. Oversea clients often require other light source for color check. For example, USA clients like CWF and European and Japan clients for TL84. It`s because that goods is sold indoor and is under shop light source but not outer sun light. It`s become more and more popular to use shop light source for checking color.
- Lamp Cabinet Performance
-
YY6 Light 6 Source Color Assessment Cabinet
I. Descriptions
Color Assessment Cabinet,suitable for all industries and applications where there is a need to maintain color consistency and quality-e.g. Automotive,Ceramics, Cosmetics, Foodstuffs,Footwear, Furniture, knitwear, Leather, Ophthalmic, Dyeing, Packaging, Printing, Inks and Textile.
Since different light source has different radiant energy,when they arrive on the surface of an article,different colors display.With regard to color management in industrial production,when a checker has compared the color consistence between products and examples, but there may exist difference between light source used here and light source applied by the client.In such condition, color under different light source differs. It always brings following issues: Client makes complaint for color difference even requires for rejection of goods, seriously damaging company credit.
To resolve the above problem,the most effective way is to check good color under same light source .For example,international Practice applies Artificial Daylight D65 as standard light source for checking goods color.
It`s very important to use standard light source to chenk color difference in night duty.
Besides D65 light source ,TL84,CWF, UV, and F/A light sources are available in this Lamp Cabinet for metamerism effect.
-
YYP103A Whiteness Meter
Product introduction
Whiteness Meter/Brightness meter is widely applied in papermaking, fabric, printing, plastic,
ceramic and porcelain enamel, construction material, chemical industry, salt making and other
testing department that need to test whiteness. YYP103A whiteness meter also can test the
paper’s transparency, opacity, light scatting coefficient and light absorption coefficient.
Product features
1.Test ISO whiteness (R457 whiteness) .It can also determine the fluorescent whitening degree of phosphor emission.
2. Test of lightness tristimulus values (Y10), opacity and transparency. Test light scatting coefficient
and light absorption coefficient.
3. Simulate D56. Adopt CIE1964 supplement color system and CIE1976 (L * a * b *) color space color difference formula. Adopt d / o observing geometry lighting conditions. The diameter of diffusion ball is 150mm. The diameter of test hole is 30mm or 19mm. Eliminate the sample mirror reflected light by
light absorbers.
4. Fresh appearance and compact structure; Guarantee the accuracy and stability of measured
data with advanced circuit design.
5. LED display; Prompt operation steps with Chinese. Display statistical result. Friendly man-machine interface makes the operation simple and convenient.
6. Instrument is equipped with a standard RS232 interface so it can cooperate with the microcomputer software to communicate.
7. Instruments have a power-off protection; the calibration data is not lost when the power is cut off.
-
YYP-PL Tissue Tensile Strength Tester –Pneumatic type
- Product Description
The tisse tensile tester YYPPL is a basic instrument for testing the physical properties of materials
such as tension, pressure (tensile). The vertical and multi-column structure is adopted, and the
chuck spacing can be arbitrarily set within a certain range. The stretching stroke is large, the
running stability is good, and the test accuracy is high. The tensile testing machine is widely
used in fiber, plastic, paper, paper board, film and other non-metallic materials top pressure, soft
plastic packaging heat sealing strength, tearing, stretching, various puncture, compression,
ampoule breaking force, 180 degrees peel, 90 degrees peel, shear force and other test projects.
At the same time, the instrument can measure paper tensile strength, tensile strength,
elongation, breaking length, tensile energy absorption, tensile finger
Number, tensile energy absorption index and other items. This product is suitable for medical,
food, pharmaceutical, packaging, paper and other industries.
- Product Features:
- The design method of the imported instrument clamp is adopted to avoid the detection error caused by the operator because of the operation technical problems.
- Imported customized high sensitivity load element, imported lead screw to ensure accurate displacement
- Can be arbitrarily selected in the speed range of 5-600mm/min, this function can meet the 180° peel, ampoule bottle breaking force, film tension and other samples detection.
- With tensile force, plastic bottle top pressure test, plastic film, paper elongation, breaking force, paper breaking length, tensile energy absorption, tensile index, tensile energy absorption index and other functions.
- The motor warranty is 3 years, the sensor warranty is 5 years, and the whole machine warranty is 1 year, which is the longest warranty period in China.
- Ultra-long travel and large load (500 kg) structure design and flexible sensor selection facilitate the expansion of multiple test projects.
- Meeting standard:
TAPPI T494、ISO124、ISO 37、GB 8808、GB/T 1040.1-2006、GB/T 1040.2-2006、GB/T 1040.3-2006、GB/T 1040.4-2006、GB/T 1040.5-2008、GB/T 4850- 2002、 GB/T 12914-2008、GB/T 17200、 GB/T 16578.1-2008、 GB/T 7122、 GB/T 2790、GB/T 2791、GB/T 2792、GB/T 17590、 GB 15811、ASTM E4、ASTM D882、ASTM D1938、 ASTM D3330、ASTM F88、 ASTM F904、JIS P8113、 QB/T 2358、 QB/T 1130 、 YBB332002-2015 、YBB00172002-2015 、YBB00152002-2015
-
YYP-PL Trouser Tearing Tensile Strength Tester
- Product Description
The Trouser Tearing Tensile Strength Tester is a basic instrument for testing the physical properties
of materials such as tension, pressure (tensile). The vertical and multi-column structure is adopted,
and the chuck spacing can be arbitrarily set within a certain range. The stretching stroke is large, the running stability is good, and the test accuracy is high. The tensile testing machine is widely used in fiber, plastic, paper, paper board, film and other non-metallic materials top pressure, soft plastic packaging heat sealing strength, tearing, stretching, various puncture, compression, ampoule
breaking force, 180 degrees peel, 90 degrees peel, shear force and other test projects. At the same time, the instrument can measure paper tensile strength, tensile strength, elongation, breaking
length, tensile energy absorption, tensile finger
Number, tensile energy absorption index and other items. This product is suitable for medical, food, pharmaceutical, packaging, paper and other industries.
- Product Features:
- The design method of the imported instrument clamp is adopted to avoid the detection
- error caused by the operator because of the operation technical problems.
- Imported customized high sensitivity load element, imported lead screw to ensure accurate displacement
- Can be arbitrarily selected in the speed range of 5-600mm/min, this function can
- meet the 180° peel, ampoule bottle breaking force, film tension and other samples detection.
- With tensile force, plastic bottle top pressure test, plastic film, paper elongation,
- breaking force, paper breaking length, tensile energy absorption, tensile index,
- tensile energy absorption index and other functions.
- The motor warranty is 3 years, the sensor warranty is 5 years, and the whole machine warranty is 1 year, which is the longest warranty period in China.
- Ultra-long travel and large load (500 kg) structure design and flexible sensor selection facilitate the expansion of multiple test projects.
- Meeting standard:
ISO 6383-1、GB/T 16578、ISO 37、GB 8808、GB/T 1040.1-2006、GB/T 1040.2-2006、
GB/T 1040.3-2006、GB/T 1040.4-2006、GB/T 1040.5-2008、GB/T 4850- 2002、 GB/T 12914-2008、GB/T 17200、 GB/T 16578.1-2008、 GB/T 7122、 GB/T 2790、GB/T 2791、GB/T 2792、
GB/T 17590、 GB 15811、ASTM E4、ASTM D882、ASTM D1938、 ASTM D3330、ASTM F88、 ASTM F904、JIS P8113、 QB/T 2358、 QB/T 1130 、 YBB332002-2015 、YBB00172002-2015 、YBB00152002-2015
-
YYP-A6 Packaging Pressure Tester
Instrument use:
Used to test food package (instant noodle sauce package, ketchup package, salad package,
vegetable package, jam package, cream package, medical package, etc.) need to do static
pressure test. 6 finished sauce packs can be tested at a time. Test item: Observe the
leakage and damage of the sample under fixed pressure and fixed time.
Working principle of instrument:
The device is controlled by touch microcomputer, through adjusting the pressure reducing
valve to make the cylinder reach the expected pressure, the microcomputer timing, control
the reversing of the solenoid valve, control the up and down action of the sample pressure
plate, and observe the sealing condition of the sample under a certain pressure and time.
-
YYP112-1 Halogen Moisture Meter
Standard:
AATCC 199 Drying time of Textiles : Moisture Analyzer Method
ASTM D6980 Standard Test Method for Determinaton of Moisture in Plastics by Loss in Weight
JIS K 0068 Test Methods foe water content of chemical products
ISO 15512 Plastics – Determination of water content
ISO 6188 Plastics – Poly(alkylene terephthalate) granules – Determination of water content
ISO 1688 Starch – Determination of moisture content – Oven-drying methods
-
YYP112B Waste Paper Moisture Meter
（Ⅰ）Application:
YYP112B Waste paper moisture meter permits to measure the moisture content of waste paper, straw and grass quickly using the advanced technology of electromagnetic waves. It also has the characteristics of wide moisture content scope, small cubage, light weight and simple operation.
（Ⅱ）TECHNICAL DATES：
◆Measuring Range：0~80%
◆Repetition Accuracy：±0.1%
◆Display time：1 second
◆Temperature Range：－5℃～＋50℃
◆Power Supply：9V （6F22）
◆Dimension：160mm×60mm×27mm
◆Probe length:600mm