High definition Pneumatic Textile Sample Cutter - YY502 Fabric Pilling Instrument (Circular Track Method) – Yueyang

Used for evaluating the fuzziness and pilling of woven and woven fabrics.

GB/T 4802.1, GB8965.1-2009.

1. The use of synchronous motor drive, stable performance, no maintenance;
2. low operating noise;
3. The height of the brush is adjustable;
4. Touch screen control display, Chinese and English menu operation interface

1. Motion trajectory: Φ40mm circular trajectory

2.Brush disk parameters:

2.1 The diameter of the nylon brush is (0.3±0.03) mm of nylon yarn. The rigidity of the nylon yarn should be uniform. The head of the nylon yarn is round, and the brush surface is flat
2.2 The diameter of nylon brush flocking wire is (4.5±0.06) mm, each hole is (150±4) nylon yarn, hole spacing is (7±0.3) mm

3. The nylon brush in the abrasive is equipped with an adjustment plate, which can adjust the effective height of the nylon thread and control the fuzzing effect of the nylon brush. Brush height adjustable range 2 ~ 12) mm

4.Pressure hammer：100cN、290cN、490cN （combined use）    

5.Sampling Size：Area 100cm2

6.Countless choose forgotten：(1～999999)times（Digital setting）

7.Reciprocating velocity of sample：60 time/min

8.Power Supply：AC220V,50Hz,200W

9.External Size：550mm×300mm×450mm(L×W×H)

10.Weight：30kg

1. Host— 1 Set
2. Sample Clamp—1 Pcs
3. Heavy punch
100cN—1 Pcs
290cN–1 Pcs
4. Standard 2201 gabardine—2 Pcs
￠140mm polyurethane foam gasket–5 Pcs
￠105mm polyurethane foam gasket–5 Pcs