1)The deflector plate is made by welding 5mm thick PP polypropylene plates, which have extremely strong acid and alkali resistance and corrosion resistance. It is installed at the rear and top of the working space and consists of two plates, forming an air chamber between the connection of the working space and the exhaust pipe, and evenly discharging the polluted gas. The deflector plate is combined with the cabinet body by a PP fixed base and can be disassembled and assembled repeatedly.
2)The sliding vertical window sliding door, combined with the balance position, can stop at any movable point of the operating surface. The outer frame of the window adopts a frameless door, which is embedded and clamped with the glass on all four sides, with low frictional resistance, ensuring the safety and durability of the window. The window glass is made of 5mm thick tempered glass, which has high strength, good bending resistance, and will not produce sharp-angled small fragments when it breaks. The window lifting counterweight adopts a synchronous structure. The synchronous belt drive ensures accurate displacement, exerts little force on the shaft, has good wear resistance and anti-aging performance.
3)All internal connection devices of the connection part must be concealed and corrosion-resistant, with no exposed screws. The external connection devices are all stainless steel components and non-metallic materials resistant to chemical corrosion.
4)The exhaust outlet adopts a PP material gas collection hood, with a 250mm diameter round hole at the air outlet and a sleeve connection to reduce gas turbulence.
5)The countertop is made of (domestic) solid core physical and chemical board (12.7mm thick), which is impact-resistant and corrosion-resistant, and the formaldehyde level meets the E1 standard or 8mm thick high-quality pure PP(polypropylene) board is used.
6)The waterway is equipped with imported one-time formed PP small cup grooves, which are resistant to acid, alkali and corrosion. The single-port faucet is made of brass and installed on the countertop inside the fume hood (water is an optional item. The default is a single-port faucet on the desktop, and it can be changed to other types of water as needed).
7)The circuit control panel adopts a liquid crystal display panel (which can be freely adjusted in terms of speed and can adapt to most similar products on the market, and supports 6-second quick opening of the electric air valve), with 8 keys for power, setting, confirm, lighting, backup, fan, and air valve + / -. The LED white light for quick start-up is installed on the top of the fume hood and has a long service life. The socket is equipped with four five-hole multi-functional sockets of 10A 220V. The circuit uses Chint 2.5 square copper core wires.
8)The hinges and handles of the lower cabinet door are made of acid and alkali resistant PP material, which has good corrosion resistance.
9)One inspection window is reserved on each of the left and right sides inside the upper cabinet, and one inspection window is reserved on the inner back panel of the lower cabinet for convenient fault repair. Three holes are reserved on each of the left and right side panels for the installation of facilities such as Corks.
10)The countertop is 10mm thick and the cabinet body is 8mm thick;
11)11)Outside Dimension(L×W×H mm):1500x850x2350
12)Inside Dimension(L×W×H mm):1230x650x1150