Welcome to our websites!
Products
-
YY F26 Rubber Thickness Gauge
I. Introductions: Plastic thickness meter is composed of marble base bracket and table, used to test the thickness of plastic and film, table display reading, according to the machine. II.Main functions: The thickness of the measured object is the scale indicated by the pointer when the upper and lower parallel disks are clamped. III. Reference Standard: ISO 3034-1975(E), GB/T 6547-1998, ISO3034:1991, GB/T 451.3-2002, ISO 534:1988, ISO 2589:2002(E), QB/T 2709-2005, GB/T2941-2006, ISO 4648-199... -
YY401A Rubber Aging Oven
- Application and characteristics
1.1 Mainly used in scientific research units and factories plasticity materials (rubber, plastic), electrical insulation and other materials aging test.
1.2 The maximum working temperature of this box is 300℃, the working temperature can be from room temperature to the highest working temperature, within this range can be selected at will, after selection can be made by the automatic control system in the box to keep the temperature constant.
-
YY-6005B Ross Flex Tester
I. Introductions: This machine is suitable for right Angle bending test of rubber products, soles, PU and other materials. After stretching and bending the test piece, check the degree of attenuation, damage and cracking. II.Main functions: The sole strip test piece was installed on the ROSS torsional testing machine, so that the notch was directly above the center of the rotating shaft of the ROSS torsional testing machine. The test piece was driven by the ROSS torsional testing machine to c... -
YY-6007B EN Bennewart Flex Tester
I. Introductions: The sole test sample is installed on the EN zigzag testing machine, so that the notch falls on the EN zigzag testing machine is just above the center of the rotating shaft. The EN zigzag testing machine drives the test piece to stretch (90±2)º zigzag on the shaft. After reaching a certain number of tests, the notch length of the test sample is observed to measure. The folding resistance of the sole was evaluated by the incision growth rate. II. Main functions: Test rubber,... -
YY-6009 Akron Abrasion Tester
I.Introductions: The Akron Abrasion Tester is developed according to BS903 and GB/T16809 specifications. The wear resistance of rubber products such as soles, tires and chariot tracks is specially tested. The counter adopts electronic automatic type, can set the number of wear revolutions, reach no fixed number of revolutions and automatic stop. II.Main Functions: The mass loss of rubber disc before and after grinding was measured, and the volume loss of rubber disc was calculated according t... -
YY-6010 AS DIN Abrasion Tester (Vacuum type)
I. Introductions: Wear-resistant testing machine will test the test piece fixed in the testing machine seat, through the test seat to test the sole to increase a certain pressure in the rotation of the testing machine covered with wear-resistant sandpaper roller friction forward motion, a certain distance, the measurement of the weight of the test piece before and after friction, According to the specific gravity of the sole test piece and the correction coefficient of standard rubber, the re... -
YY-6016 Vertical Rebound Tester
I. Introductions: The machine is used to test the elasticity of rubber material with a free drop hammer. First adjust the level of the instrument, and then lift the drop hammer to a certain height. When placing the test piece, attention should be paid to making the drop point 14mm away from the edge of the test piece. The average rebound height of the fourth, fifth and sixth tests was recorded, excluding the first three tests. II.Main functions: The machine adopts the standard test method of ... -
YY-6018 Shoe Heat Resistance Tester
I. Introductions: Shoe heat resistance tester used to test the high temperature resistance of sole materials (including rubber, polymer). After contacting the sample with the heat source (metal block at constant temperature) at a fixed pressure for about 60 seconds, observe the surface damage of the specimen, such as softening, melting, cracking, etc., and determine whether the specimen is qualified according to the standard. II.Main functions: This machine adopts vulcanized rubber or thermop... -
YY-6024 Compression Set Fixture
I. Introductions: This machine is used for rubber static compression test, sandwiched between the plate, with the screw rotation, compression to a certain ratio and then put into a certain temperature oven, after the specified time to take, remove the test piece, cool for 30 minutes, measure its thickness, put into the formula to find its compression skew. II. Meeting standard: GB/T 7759-1996 ASTM-D395 III.Technical Specifications: 1. The matching distance ring: 4 mm/4. 5 mm/5mm/9. 0 mm/9. 5... -
YY-6027-PC Sole Puncture Resistant Tester
I. Introductions: A:(static pressure test) : test the shoe head at a constant rate through the testing machine until the pressure value reaches the specified value, measure the minimum height of the sculpted clay cylinder inside the test shoe head, and evaluate the compression resistance of the safety shoe or protective shoe head with its size. B: (Puncture test) : The testing machine drives the puncture nail to puncture the sole at a certain speed until the sole is completely pierced or reac... -
YY-6077-S Temperature &Humidity Chamber
I. Introductions: High temperature &high humidity, low temperature & low humidity test products, suitable for electronic, electrical appliances, batteries, plastics, food, paper products, vehicles, metal, chemistry, building materials, research institute, inspection and quarantine bureau, universities and other industry units for quality control testing. II. Freezing system: RRefrigeration system: adopting France tecumseh compressors, European and American type high efficiency powe... -
YY-DH-300 Density Balance
Brief introduction: This series of densitometer is mainly aimed at the density measurement of polymer field, excellent quality, high precision density, real-time display density value, easy to operate, save time; Better measurement stability and reliability; Suitable for demanding occasions. Widely used: Polymer, plastic, rubber, wire and cable, composite materials, packaging materials, shoes, pipes, electrical appliances, sports equipment, tires, glass industry, rocks, ores, jewelry, crops, ...