Products
-
Single Side Test Bench PP
Bench size can be customized; Make renderings for free.
-
Central Test Bench PP
Bench size can be customized; Make renderings for free.
-
Single Side Test Bench All Steel
Table top:
Using 12.7mm solid black physical and chemical board for the laboratory,
thickened to 25.4mm around, double-layer exterior garden along the edge,
acid and alkali resistance, water resistance, anti-static, easy to clean.
-
Central Test Bench All Steel
Table top:
Using 12.7mm solid black physical and chemical board for the laboratory, thickened to 25.4mm
around, double-layer exterior garden along the edge, acid and alkali resistance,
water resistance, anti-static, easy to clean.
-
Laboratory Fume Exhaust
Joint:
Adopts corrosion-resistant high-density PP material, can rotate 360 degrees to adjust the direction, easy to disassemble, assemble and clean
Sealing device:
The sealing ring is made of wear-resistant, corrosion-resistant and age-resistant high-density rubber and plastic material
Joint link rod:
Made of stainless steel
Joint tension knob:
The knob is made of corrosion-resistant high-density material, embedded metal nut, stylish and atmospheric appearance.
-
YYT1 Laboratory Fume Hood
I.Material profile:
1. The main side plate, front steel plate, back plate, top plate and lower cabinet body can be made
of 1.0~1.2mm thick steel plate, 2000W imported from Germany
Dynamic CNC laser cutting machine cutting material, bending using automatic CNC bending
machine one at a time bending molding, the surface through epoxy resin powder
Electrostatic line automatic spraying and high temperature curing.
2. The lining plate and the deflector adopts 5mm thick core anti-double special plate with good
anti-corrosion and chemical resistance. The baffle fastener uses PP
High quality material production integrated molding.
3. Move the PP clamp on both sides of the window glass, handle PP into one body, embed 5mm tempered glass, and open the door at 760mm.
Free lifting, sliding door up and down sliding device adopts pulley wire rope structure, stepless
arbitrary stay, sliding door guide device by anti-corrosion polymerization
Made of vinyl chloride.
3. The fixed window frame is made of epoxy resin spraying of steel plate, and 5mm thick tempered glass is embedded in the frame.
4. The table is made of (domestic) solid core physical and chemical board (12.7mm thick) acid and alkali resistance, impact resistance, corrosion resistance, formaldehyde reaches E1 level standards.
5. All the internal connection devices of the connection part need to be hidden and corrosion
resistant, there are no exposed screws, and the external connection devices are resistant
Corrosion of stainless steel parts and non-metallic materials.
6. The exhaust outlet adopts an integrated air hood with the top plate. The diameter of the outlet
is 250mm round hole, and the sleeve is connected to reduce the gas disturbance.
-
YY611D Air Cooled Weathering Color Fastness Tester
Instrument use:
It is used for light fastness, weather fastness and light aging experiment of various textile, printing
and dyeing, clothing, geotextile, leather, plastic and other colored materials. By controlling the light, temperature, humidity, rain and other items in the test chamber, the simulation natural conditions required for the experiment are provided to test the light fastness, weather fastness and light aging performance of the sample.
Meet the standard:
GB/T8427, GB/T8430, ISO105-B02, ISO105-B04 and other standards.
Instrument characteristics:
1.Large screen color touch screen, English and Chinese menu operation, dynamic icon display the status of the test chamber, convenient and clear;
2. Omron PLC control, anti-interference ability;
3.Energy-saving, electricity per hour below 2.5 degrees, no need to be specially equipped with a regulator;
4.With a self-shaping system, the sample placement has a large degree of freedom to ensure that the sample is evenly illuminated;
5.Double circuit electronic redundancy design, to ensure long-term continuous trouble-free operation
of the instrument;
6.With open user program, users can set the corresponding operation program according to their own requirements, to meet the requirements of different methods;
7. With fault prompt function and self-diagnosis function: multi-point monitoring, easy maintenance, to ensure the normal operation of the instrument;
8. The clutch is used between the rotating frame and the motor, and the rotating frame is flexible, and the sample can be easily installed without the point function.
9.Measuring and control system FY-Meas&Ctrl, including: (1) Hardware: multifunctional circuit board
for measurement and control; (2) Software: FY-Meas&Ctrl multi-function measurement and control software V2.0 (certificate number: soft landing word 4762843).
-
YY611B Weathering Color Fastness Tester
Meet the standard:
GB/T8427-2019, GB/T8427-2008, GB/T8430, GB/T14576, GB/T16422.2, 1865, 1189, GB/T15102, GB/T15104, ISO105-B02, ISO105-B04, ISO105-B0 6, ISO4892-2-A, ISO4892-2-B, AATCC16, 169,
JIS 0843, GMW 3414, SAEJ1960, 1885, JASOM346, PV1303, ASTM G155-1, 155-4, etc.
Instrument features:
1. HD color full screen display operation, a variety of expressions: numbers, charts, etc.; It can
display real-time monitoring curves of light irradiance, temperature and humidity. And store a
variety of detection standards, convenient for users to directly select and call.
2. Safety protection monitoring points (irradiance, water level, cooling air, bin temperature, bin door, overcurrent, overpressure) to achieve unmanned operation of the instrument.
3. Imported 3000W long arc xenon lamp lighting system, true simulation of daylight spectrum.
4. The irradiance sensor position is fixed, eliminating the measurement error caused by the rotating vibration of the turntable and the refraction of the light caused by the sample turntable turning to different positions.
5. Light energy automatic compensation function.
6. Temperature (irradiation temperature, heater heating), humidity (multi-group ultrasonic atomizer humidification, saturated water vapor humidification) dynamic balance technology.
7.Double circuit electronic redundancy design, to ensure long-term continuous trouble-free
operation of the instrument; Accurate and fast control of BST and BPT. Accurate and fast control
of BST andBPT.
8. Each sample independent timing function.
9.Measuring and control system FY-Meas&Ctrl, including: (1) Hardware: multifunctional circuit
board for measurement and control; (2) Software: FY-Meas&Ctrl multi-function measurement and control software V2.0 (certificate number: soft landing word 4762843).
-
YYP-WDT-20A1 Electronic Universal Testing Machine
I.Summarize
WDT series micro control electronic universal testing machine for double screw, host, control, measurement, operation integrated structure. It is suitable for tensile, compression, bending, elastic modulus, shearing, stripping, tearing and other mechanical properties test of all kinds of
(thermosetting, thermoplastic) plastics, FRP, metal and other materials and products. Its software system adopts WINDOWS interface (multiple language versions to meet the use of different
countries and regions), can measure and judge various performance according to national
standards, international standards or user-provided standards, with test parameter setting storage,
test data collection, processing and analysis, display print curve, test report print-out and other functions. This series of testing machine is suitable for material analysis and inspection of engineering plastics, modified plastics, profiles, plastic pipes and other industries. Widely used in scientific research institutions, colleges and universities, quality inspection departments, production enterprises.
Product characteristics
The transmission part of this series of testing machine adopts imported brand AC servo system, deceleration system, precision ball screw, high-strength frame structure, and can be selected
according to the need of large deformation measuring device or small deformation electronic
extender to accurately measure the deformation between the effective marking of the sample. This series of testing machine integrates modern advanced technology in one, beautiful shape, high precision, wide speed range, low noise, easy operation, accuracy up to 0.5, and provides a variety
of specifications/uses of fixtures for different users to choose. This series of products has obtained
the EU CE certification.
II.Executive standard
Meet GB/T 1040, GB/T 1041, GB/T 8804, GB/T 9341, ISO 7500-1, GB 16491, GB/T 17200,
ISO 5893, ASTM D638, ASTM D695, ASTM D790 and other standards.
-
YYP 20KN Electronic Universal Tension Machine
1.Features and uses:
20KN electronic universal material testing machine is a kind of material testing equipment with
domestic leading technology. The product is suitable for tensile, compression, bending, shearing, tearing, stripping and other physical properties test of metal, non-metal, composite materials and products. The measurement and control software uses Windows 10 operating system platform, graphical software interface, flexible data processing mode, modular VB programming method,
safe limit protection and other functions. It also has the function of automatic algorithm generation
and automatic editing of test report, which greatly facilitates and improves the debugging and
system redevelopment ability, and can calculate parameters such as maximum force, yield force,
non-proportional yield force, average stripping force, elastic modulus, etc. It has novel structure, advanced technology and stable performance. Simple operation, flexible, easy maintenance;
Set a high degree of automation, intelligence in one. It can be used for mechanical properties
analysis and production quality inspection of various materials in scientific research departments, colleges and universities and industrial and mining enterprises.
-
YY- IZIT Izod Impact Tester
I.Standards
l ISO 180
l ASTM D 256
II.Application
Izod method is used to investigate the behavior of specified types of specimen under impact conditions defined and for estimating the brittleness or toughess of specimens within the limitations inherent in the test conditions.
The test specimen, supported as a vertical cantilever beam, is broken by a single impact of a striker, with the line of impact a fixed distance from the specimen clamp and, in the case of notched
specimens, from the centerline of the notch.
-
YY22J Izod Charpy Tester
I.Features and uses:
The digital display cantilever beam impact testing machine is mainly used for the determination of
impact toughness of hard plastics, reinforced nylon FRP, ceramics, cast stone, electrical insulation materials and other non-metallic materials. With stable and reliable performance, high precision,
easy to use and other characteristics, can directly calculate the impact energy, save 60 historical
data, 6 kinds of unit transformation, two screen display, can display the practical Angle and Angle
peak or energy, is the chemical industry, scientific research units, colleges and universities, quality inspection departments and professional manufacturers laboratory and other units ideal test
equipment.