Products
-
YY109 Automatic Bursting Strength Tester-Button Type
1.Brief Introduction
1.1 Use
This machine is suitable for paper, cardboard, cloth, leather and other crack resistance strength test.
1.2 Principle
This machine uses the signal transmission pressure, and automatically retains the maximum rupture strength value when the sample breaks. Put the sample on the rubber mold, clamp the sample through the air pressure, and then apply pressure to the motor evenly, so that the sample rises ges together with the film until the sample breaks, and the maximum hydraulic value is the breaking strength value of the sample.
2.Meeting Standard:
ISO 2759 Cardboard- -Determination of Breaking Resistance
GB / T 1539 Determination of Board board Resistance
QB / T 1057 Determination of Paper and Board Breaking Resistance
GB / T 6545 Determination of Corrugated Break Resistance Strength
GB / T 454 Determination of Paper Breaking Resistance
ISO 2758 Paper- -Determination of Break Resistance
-
YYP113E Paper Tube Crush Tester (Economy )
Equipment Introduction:
It is suitable for paper tubes with an outer diameter of 200mm or less, also known as a paper tube pressure resistance testing machine or paper tube compression testing machine. It is a basic instrument for testing the compressive performance of paper tubes. It adopts high-precision sensors and high-speed processing chips to ensure the accuracy of sampling.
Equipment Features:
After the test is completed, there is an automatic return function, which can automatically determine the crushing force and automatically save the test data.
2. Adjustable speed, full Chinese LCD display operation interface, multiple units available for selection;
3. It is equipped with a micro printer, which can directly print the test results.
-
YY-JA50(3L) Vacuum Stirring Defoaming Machine
Preface:
YY-JA50 (3L) Vacuum Stirring Defoaming Machine is developed and launched based on the principle of planetary stirring. This product has significantly enhanced the current technology in LED manufacturing processes. The driver and controller are made using microcomputer technology. This manual provides users with operation, storage, and correct usage methods. Please keep this manual properly for reference in future maintenance.
-
YYP 136 Falling Ball Impact Testing Machine
Product Introduction:
The falling ball impact testing machine is a device used to test the strength of materials such as plastics, ceramics, acrylic, glass fibers, and coatings. This equipment complies with the test standards of JIS-K6745 and A5430.
This machine adjusts the steel balls of a specified weight to a certain height, allowing them to fall freely and strike the test samples. The quality of the test products is judged based on the degree of damage. This equipment is highly praised by many manufacturers and is a relatively ideal testing device.
-
YY-RC6 Water Vapour Transmission Rate Tester(ASTM E96) WVTR
I.Product Introduction：
The YY-RC6 water vapor transmission rate tester is a professional, efficient and intelligent WVTR high-end testing system, suitable for various fields such as plastic films, composite films, medical care and construction
Determination of the water vapor transmission rate of materials. By measuring the water vapor transmission rate, the technical indicators of products such as non-adjustable packaging materials can be controlled.
II.Product Applications
Basic Application
Plastic film
Water vapor transmission rate testing of various plastic films, plastic composite films, paper-plastic composite films, co-extruded films, aluminum-coated films, aluminum foil composite films, glass fiber aluminum foil paper composite films and other film-like materials.
Platic sheet
Water vapor transmission rate testing of sheet materials such as PP sheets, PVC sheets, PVDC sheets, metal foils, films, and silicon wafers.
Paper,carboard
Water vapor transmission rate testing of composite sheet materials such as aluminum-coated paper for cigarette packs, paper-aluminum-plastic (Tetra Pak), as well as paper and cardboard.
Artificial skin
Artificial skin needs a certain degree of water permeability to ensure good respiratory performance after being implanted in humans or animals. This system can be used to test the moisture permeability of artificial skin.
Medical supplies and auxiliary materials
It is used for water vapor transmission tests of medical supplies and excipients, such as water vapor transmission rate tests of materials like plaster patches, sterile wound care films, beauty masks, and scar patches.
Textiles, non-woven fabrics
Testing of water vapor transmission rate of textiles, non-woven fabrics and other materials, such as waterproof and breathable fabrics, non-woven fabric materials, non-woven fabrics for hygiene products, etc.
Extended application
Solar backsheet
Water vapor transmission rate testing applicable to solar backsheets.
Liquid crystal display film
It is applicable to the water vapor transmission rate test of liquid crystal display films
Paint film
It is applicable to the water resistance test of various paint films.
Cosmetics
It is applicable to the test of the moisturizing performance of cosmetics.
Biodegradable membrane
It is applicable to the water resistance test of various biodegradable films, such as starch-based packaging films, etc.
III.Product characteristics
1.Based on the cup method testing principle, it is a water vapor transmission rate (WVTR) testing system commonly used in film samples, capable of detecting water vapor transmission as low as 0.01g/m2·24h. The high-resolution load cell configured provides excellent system sensitivity while ensuring high precision.
2. Wide-range, high-precision, and automated temperature and humidity control makes it easy to achieve non-standard testing.
3. The standard purge wind speed ensures a constant humidity difference between the inside and outside of the moisture-permeable cup.
4. The system automatically resets to zero before weighing to ensure the accuracy of each weighing.
5. The system adopts a cylinder lifting mechanical junction design and intermittent weighing measurement method, effectively reducing system errors.
6. The temperature and humidity verification sockets that can be quickly connected facilitate users to perform rapid calibration.
7. Two rapid calibration methods, standard film and standard weights, are provided to ensure the accuracy and universality of the test data.
8. All three moisture-permeable cups can conduct independent tests. The test processes do not interfere with each other, and the test results are displayed independently.
9. Each of the three moisture-permeable cups can conduct independent tests. The test processes do not interfere with each other, and the test results are displayed independently.
10. The large-sized touch screen offers user-friendly human-machine functions, facilitating user operation and quick learning.
11. Support multi-format storage of test data for convenient data import and export;
12.Support multiple functions such as convenient historical data query, comparison, analysis and printing;
-
YYP-50KN Electronic Universal Testing Machine (UTM)
1. Overview
The 50KN Ring Stiffness Tensile Testing Machine is a material esting device with leading domestic technology. It is suitable for physical property tests such as tensile, compressive, bending, shearing, tearing and peeling of metals, non-metals, composite materials and products. The test control software uses the Windows 10 operating system platform, featuring a graphical and image-based software interface, flexible data processing methods, modular VB language programming methods, and safe limit protection functions. It also has the functions of automatic generation of algorithms and automatic editing of test reports, which greatly facilitate and improve the debugging and system redevelopment capabilities. It can calculate parameters such as yield force, elastic modulus, and average peeling force. It uses high-precision measuring instruments and integrates high automation and intelligence. Its structure is novel, technology is advanced, and performance is stable. It is simple, flexible and easy to maintain in operation. It can be used by scientific research departments, colleges and universities, and industrial and mining enterprises for mechanical property analysis and production quality inspection of various materials.
2. Main Technical Parameters:
2.1 Force Measurement Maximum load: 50kN
Accuracy: ±1.0% of the indicated value
2.2 Deformation (Photoelectric Encoder) Maximum tensile distance: 900mm
Accuracy: ±0.5%
2.3 Displacement Measurement Accuracy: ±1%
2.4 Speed: 0.1 - 500mm/min
2.5 Printing Function: Print maximum strength, elongation, yield point, ring stiffness and corresponding curves, etc. (Additional printing parameters can be added as per user requirements).
2.6 Communication Function: Communicate with the upper computer measurement control software, with automatic serial port search function and automatic processing of test data.
2.7 Sampling Rate: 50 times/s
2.8 Power Supply: AC220V ± 5%, 50Hz
2.9 Mainframe Dimensions: 700mm × 550mm × 1800mm 3.0 Mainframe Weight: 400kg
-
YY8503 Crush Tester
I.Instruments Introduction:
YY8503 Crush tester, also known as computer measurement and control cruch tester, cardboard cruchtester, electronic crush tester, edge pressure meter, ring pressure meter, is the basic instrument for cardboard/paper compressive strength testing (that is, paper packaging testing instrument), equipped with a variety of fixture accessories can test the ring compression strength of base paper, flat compression strength of cardboard, edge compression strength, bonding strength and other tests. In order to paper production enterprises to control production costs and improve product quality. Its performance parameters and technical indicators meet the relevant national standards.
II.Implementation standards:
1.GB/T 2679.8-1995 “Determination of ring compression strength of paper and paperboard”;
2.GB/T 6546-1998 “Determination of edge pressure strength of Corrugated cardboard”;
3.GB/T 6548-1998 “Determination of the bonding strength of Corrugated cardboard”;
4.GB/T 2679.6-1996 “Determination of flat compression strength of Corrugated base paper”;
5.GB/T 22874 “Determination of flat compression strength of Single-sided and single-corrugated cardboard”
The following tests can be carried out with the corresponding
-
YY-KND200 Automatic Kjeldahl Nitrogen Analyzer
- Product Introduction:
Kjeldahl method is a classical method for nitrogen determination. Kjeldahl method is widely used to determine nitrogen compounds in soil, food, animal husbandry, agricultural products, feed and other materials. The sample determination by Kjeldahl method requires three processes: sample digestion, distillation separation and titration analysis
YY-KDN200 automatic Kjeldahl nitrogen analyzer is based on classic Kjeldahl nitrogen determination method developed sample automatic distillation, automatic separation and analysis of “nitrogen element” (protein) through external related technology analysis system, its method, manufacturing in line with the “GB/T 33862-2017 full (half) automatic Kjeldahl nitrogen analyzer” manufacturing standards and international standards.
-
YY-ZR101 Glow Wire Tester
I. Equipment name: Glow Wire Tester
II.Equipment model:YY-ZR101
III.Equipment Introductions:
The glow wire tester will heat the specified material (Ni80/Cr20) and shape of the electric heating wire (Φ4mm nickel-chromium wire) with high current to the test temperature (550℃ ~ 960℃) for 1min, and then vertically burn the test product for 30s at the specified pressure (1.0N). Determine the fire risk of electrical and electronic equipment products according to whether the test products and bedding are ignited or held for a long time; Determine the ignitability, ignitability temperature (GWIT), flammability and flammability index (GWFI) of solid insulating materials and other solid combustible materials. The glow-wire tester is suitable for the research, production and quality inspection departments of lighting equipment, low-voltage electrical appliances, electrical instruments, and other electrical and electronic products and their components.
IV.Technical parameters:
1. Hot wire temperature: 500 ~ 1000℃ adjustable
2. Temperature tolerance: 500 ~ 750℃ ±10℃, > 750 ~ 1000℃ ±15℃
3. Temperature measuring instrument accuracy ±0.5
4. Scorching time: 0-99 minutes and 99 seconds adjustable (generally selected as 30s)
5. Ignition time: 0-99 minutes and 99 seconds, manual pause
6. Extinguish time: 0-99 minutes and 99 seconds, manual pause
Seven. Thermocouple: Φ0.5/Φ1.0mm Type K armored thermocouple (not guaranteed)
8. Glowing wire: Φ4 mm nickel-chromium wire
9. The hot wire applies pressure to the sample: 0.8-1.2N
10. Stamping depth: 7mm±0.5mm
11. Reference standard: GB/T5169.10, GB4706.1, IEC60695, UL746A
twelve Studio volume: 0.5m3
13. External dimensions: 1000mm wide x 650mm deep x 1300mm high.
-
YY-JF3 Oxygen Index Tester
I.Scope of application:
Applicable to plastics, rubber, fiber, foam, film and textile materials such as combustion performance measurement
II.Technical parameters:
1. Imported oxygen sensor, digital display oxygen concentration without calculation, higher accuracy and more accurate, range 0-100%
2. Digital resolution: ±0.1%
3. The measuring accuracy of the whole machine: 0.4
4. Flow regulation range: 0-10L/min (60-600L/h)
5. Response time: < 5S
6. Quartz glass cylinder: Inner diameter ≥75㎜ high 480mm
7. Gas flow rate in the combustion cylinder: 40mm±2mm/s
8. Flow meter: 1-15L/min (60-900L/H) adjustable, precision 2.5
9. Test environment: Ambient temperature: room temperature ~ 40℃; Relative humidity: ≤70%;
10. Input pressure: 0.2-0.3MPa (note that this pressure cannot be exceeded)
11. Working pressure: Nitrogen 0.05-0.15Mpa Oxygen 0.05-0.15Mpa Oxygen/nitrogen mixed gas inlet: including pressure regulator, flow regulator, gas filter and mixing chamber.
12. Sample clips can be used for soft and hard plastics, textiles, fire doors, etc
13. Propane (butane) ignition system, flame length 5mm-60mm can be freely adjusted
14. Gas: industrial nitrogen, oxygen, purity > 99%; (Note: Air source and link head user own).
Tips: When the oxygen index tester is tested, it is necessary to use not less than 98% of the industrial grade oxygen/nitrogen each bottle as the air source, because the above gas is a high-risk transport product, can not be provided as the oxygen index tester accessories, can only be purchased at the user’s local gas station. (In order to ensure the purity of the gas, please purchase at the local regular gas station)
15.Power requirements: AC220 (+10%) V, 50HZ
16. Maximum power: 50W
17. Igniter: there is a nozzle made of a metal tube with an inner diameter of Φ2±1mm at the end, which can be inserted into the combustion cylinder to ignite the sample, the flame length: 16±4mm, the size is adjustable
18. Self-supporting material sample clip: it can be fixed on the position of the shaft of the combustion cylinder and can vertically clamp the sample
19. Optional: Sample holder of non-self-supporting material: it can fix two vertical sides of the sample on the frame at the same time (suitable for textile film and other materials)
20.The base of the combustion cylinder can be upgraded to ensure that the temperature of the mixed gas is maintained at 23℃ ~ 2℃
III.Chassis structure :
1. Control box: The CNC machine tool is used to process and form, the static electricity of the steel spray box is sprayed, and the control part is controlled separately from the test part.
2. Combustion cylinder: high temperature resistance high quality quartz glass tube (inner diameter ￠75mm, length 480mm) Outlet diameter: φ40mm
3. Sample fixture: self-supporting fixture, and can hold the sample vertically; (Optional non-self-supporting style frame), two sets of style clips to meet different test requirements; Pattern clip splice type, easier to place pattern and pattern clip
4. The diameter of the tube hole at the end of the long rod igniter is ￠2±1mm, and the flame length of the igniter is (5-50) mm
IV.Meeting the standard:
Design standard:
GB/T 2406.2-2009
Meet the standard:
ASTM D 2863, ISO 4589-2, NES 714 ; GB/T 5454 ;GB/T 10707-2008 ; GB/T 8924-2005; GB/T 16581-1996 ;NB/SH/T 0815-2010 ;TB/T 2919-1998; IEC 61144-1992 ISO 15705-2002; ISO 4589-2-1996;
Note: Oxygen sensor
1. Introduction of oxygen sensor: In the oxygen index test, the function of the oxygen sensor is to convert the chemical signal of combustion into an electronic signal displayed in front of the operator. The sensor is equivalent to a battery, which is consumed once per test, and the higher the user’s frequency of use or the higher the oxygen index value of the test material, the higher the oxygen sensor will have a higher consumption.
2. Maintenance of oxygen sensor: Excluding normal loss, the following two points in maintenance and maintenance help to extend the service life of oxygen sensor:
1). If the equipment does not need to be tested for a long time, the oxygen sensor can be removed and the oxygen storage can be isolated by a certain means at a lower temperature. The simple operation method can be properly protected with plastic wrap and placed in the refrigerator freezer.
2). If the equipment is used at a relatively high frequency (such as a service cycle interval of three or four days), at the end of the test day, the oxygen cylinder can be turned off for one or two minutes before the nitrogen cylinder is turned off, so that the nitrogen is filled in other mixing devices to reduce the ineffective reaction of the oxygen sensor and oxygen contact.
V.Installation condition table: Prepared by users
Space requirement
Overall size
L62*W57*H43cm
Weight（KG）
30
Testbench
Work bench not less than 1 m long and not less than 0.75 m wide
Power requirement
Voltage
220V±10％ 、50HZ
Power
100W
Water
No
Gas supply
Gas: industrial nitrogen, oxygen, purity > 99%; Matching double table pressure reducing valve (can be adjusted 0.2 mpa)
Pollutant description
smoke
Ventilation requirement
The device must be placed in a fume hood or connected to a flue gas treatment and purification system
Other test requirements
-
YY-JF5 Automatic Oxygen Index Tester
- Product features
1. Full-color touch screen control, just set the oxygen concentration value on the touch screen, the program will automatically adjust to the oxygen concentration balance and emit a beep sound prompt, eliminating the trouble of manual adjustment of oxygen concentration;
2. The step proportional valve greatly improves the control accuracy of the flow rate, and the closed-loop control is used to automatically adjust the oxygen concentration drift program in the test to the target value, avoiding the disadvantages of the traditional oxygen index meter that can not adjust the oxygen concentration in the test, and greatly improves the test accuracy.
II.Relevant technical parameters:
1. Imported oxygen sensor, digital display oxygen concentration without calculation, higher accuracy and more accurate, range 0-100%.
2. Digital resolution: ±0.1%
3. Measurement accuracy: 0.1 level
4. Touch screen setting program automatically adjusts oxygen concentration
5. One-click calibration accuracy
6. One key matching concentration
7. Oxygen concentration stability automatic warning sound
8. With timing function
9. Experimental data can be stored
10. Historical data can be queried
11. Historical data can be cleared
12. You can choose whether to burn 50mm
13. Air source fault warning
14. Oxygen sensor fault information
15. Incorrect connection of oxygen and nitrogen
16. Oxygen sensor aging tips
17. Standard oxygen concentration input
18. Combustion cylinder diameter can be set (two common specifications are optional)
19. Flow regulation range: 0-20L/min (0-1200L/h)
20. Quartz glass cylinder: Choose one of two specifications (inner diameter ≥75㎜ or inner diameter ≥85㎜)
21. Gas flow rate in the combustion cylinder: 40mm±2mm/s
22. Overall dimensions: 650mm×400×830mm
23. Test environment: Ambient temperature: room temperature ~ 40℃; Relative humidity: ≤70%;
24. Input pressure: 0.25-0.3MPa
25. Working pressure: nitrogen 0.15-0.20Mpa Oxygen 0.15-0.20Mpa
26. Sample clips can be used for soft and hard plastics, all kinds of building materials, textiles, fire doors, etc
27. Propane (butane) ignition system, the ignition nozzle is made of a metal tube, with an inner diameter of Φ2±1mm nozzle at the end, which can be freely bent. Can be inserted into the combustion cylinder to ignite the sample, the flame length: 16±4mm, the size of 5mm to 60mm can be freely adjusted,
28. Gas: industrial nitrogen, oxygen, purity > 99%; (Note: Air source and link head are provided by the user)
Tips: When the oxygen index tester is tested, it is necessary to use not less than 98% of the industrial grade oxygen/nitrogen each bottle as the air source, because the above gas is a high-risk transport product, can not be provided as the oxygen index tester accessories, can only be purchased at the user’s local gas station. (In order to ensure the purity of the gas, please purchase at the local regular gas station)
- Power requirements: AC220 (+10%) V, 50HZ
- Maximum power: 150W
31.Self-supporting material sample clip: it can be fixed on the position of the shaft of the combustion cylinder and can vertically clamp the sample
32. Optional: non-self-supporting material sample clip: can fix two vertical sides of the sample on the frame at the same time (applied to soft non-self-supporting materials such as textiles)
33.The base of the combustion cylinder can be upgraded to ensure that the temperature of the mixed gas is maintained at 23℃ ~ 2℃ (contact sales for details)
Physical diagram of temperature control base
III.Meeting the standard:
Design standard: GB/T 2406.2-2009
Note: Oxygen sensor
1. Introduction of oxygen sensor: In the oxygen index test, the function of the oxygen sensor is to convert the chemical signal of combustion into an electronic signal displayed in front of the operator. The sensor is equivalent to a battery, which is consumed once per test, and the higher the user’s frequency of use or the higher the oxygen index value of the test material, the higher the oxygen sensor will have a higher consumption.
2. Maintenance of oxygen sensor: Excluding normal loss, the following two points in maintenance and maintenance help to extend the service life of oxygen sensor:
1). If the equipment does not need to be tested for a long time, the oxygen sensor can be removed and the oxygen storage can be isolated by a certain means at a lower temperature. The simple operation method can be properly protected with plastic wrap and placed in the refrigerator freezer.
2). If the equipment is used at a relatively high frequency (such as a service cycle interval of three or four days), at the end of the test day, the oxygen cylinder can be turned off for one or two minutes before the nitrogen cylinder is turned off, so that the nitrogen is filled in other mixing devices to reduce the ineffective reaction of the oxygen sensor and oxygen contact.
IV.Installation condition table:
Space requirement
Overall size
L65*W40*H83cm
Weight（KG）
30
Testbench
Work bench not less than 1 m long and not less than 0.75 m wide
Power requirement
Voltage
220V±10％ 、50HZ
Power
100W
Water
No
Gas supply
Gas: industrial nitrogen, oxygen, purity > 99%; Matching double table pressure reducing valve (can be adjusted 0.2 mpa)
Pollutant description
smoke
Ventilation requirement
The device must be placed in a fume hood or connected to a flue gas treatment and purification system
Other test requirements
Dual gauge pressure reducing valve for cylinder (0.2 mpa can be adjusted)
V. Physical display:
Green parts together with the machine,
Red parts prepared by users own
-
YYP 4207 Comparative Tracking Index(CTI)
Equipment Introduction:
The rectangular platinum electrodes are adopted. The forces exerted by the two electrodes on the sample are 1.0N and 0.05N respectively. The voltage can be adjusted within the range of 100~600V (48~60Hz), and the short-circuit current is adjustable within the range of 1.0A to 0.1A. When the short-circuit leakage current is equal to or greater than 0.5A in the test circuit, the time should be maintained for 2 seconds, and the relay will act to cut off the current, indicating that the sample is unqualified. The time constant of the drip device can be adjusted, and the drip volume can be precisely controlled within the range of 44 to 50 drops/cm3 and the drip time interval can be adjusted within the range of 30±5 seconds.
Meeting the standard:
GB/T4207、GB/T 6553-2014、GB4706.1 ASTM D 3638-92、IEC60112 、UL746A
Testing principle:
The leakage discharge test is conducted on the surface of solid insulating materials. Between two platinum electrodes of a specified size (2mm × 5mm), a certain voltage is applied and a conductive liquid of a specified volume (0.1% NH4Cl) is dropped at a fixed height (35mm) at a fixed time (30s) to evaluate the leakage resistance performance of the insulating material surface under the combined action of electric field and humid or contaminated medium. The comparative leakage discharge index (CT1) and the leakage resistance discharge index (PT1) are determined.
Main technical indicators:
1. Chamber volume: ≥ 0.5 cubic meters, with a glass observation door.
2. Chamber material: Made of 1.2MM thick 304 stainless steel plate.
3. Electrical load: The test voltage can be adjusted within 100 ~ 600V, when the short-circuit current is 1A ± 0.1A, the voltage drop should not exceed 10% within 2 seconds. When the short-circuit leakage current in the test circuit is equal to or greater than 0.5A, the relay operates and cuts off the current, indicating that the test sample is unqualified.
4. Force on the sample by two electrodes: Using rectangular platinum electrodes, the force on the sample by the two electrodes is 1.0N ± 0.05N respectively.
5. Dropping liquid device: The height of the liquid dropping can be adjusted from 30mm to 40mm, the size of the liquid drop is 44 ~ 50 drops / cm3, the time interval between liquid drops is 30 ± 1 seconds.
6. Product features: The structural components of this test box are made of stainless steel or copper, with copper electrode heads, which are resistant to high temperature and corrosion. The liquid drop counting is accurate, and the control system is stable and reliable.
7. Power supply: AC 220V, 50Hz
-
YY-1000B Thermal Gravimetric Analyzer(TGA)
Features:
- Industrial level widescreen touch structure is rich in information, including setting temperature, sample temperature, etc.
- Use the gigabit network line communication interface, the universality is strong, the communication is reliable without interruption, supports the self-recovery connection function.
- The furnace body is compact, temperature rise and fall speed adjustable.
- Water bath and heat insulation system, insulation high temperature furnace body temperature on the weight of the balance.
- Improved installation process, all adopt mechanical fixation; the sample support rod can be replaced flexibly and crucible can be matched with various models according to the requirements, so that users can have different requirements.
- The flow meter automatically switches two gas flows, fast switching speed and short stable time.
- Standard samples and charts are provided to facilitate customer calibration of constant temperature coefficient.
- Software support each resolution screen, automatically adjust the computer screen size curve display mode. Support laptop, desktop; Support WIN7, WIN10, win11.
- Support user edit device operation mode according to actual needs to achieve full automation of measurement steps. The software provides dozens of instructions, and users can flexibly combine and save each instruction according to their own measurement steps. Complex operations are reduced to one-click operations.
- One-piece fixed furnace body structure, without lifting up and down, convenient and safe, the rate of rising and falling can be adjusted arbitrarily.
- The removable sample holder can meet different requirements after replacement to facilitate cleaning and maintenance after sample contamination.
- The equipment adopts the cup-type balance weighing system according to the principle of electromagnetic balance.
Parameters:
- Temperature range: RT~1000℃
- Temperature resolution: 0.01℃
- Heating rate: 0.1～80℃/min
- Cooling rate: 0.1℃/min-30℃/min（When more than 100℃, can lower the temperature at a cooling rate）
- Temperature control mode: PID temperature control
- Balance weighing range:2g (not the weight range of the sample)
- Weight resolution: 0.01mg
- Gas control：Nitrogen, Oxygen (automatic switching)
- Power: 1000W, AC220V 50Hz or customize other standard power sources
- Communication methods: Gigabit gateway communications
- Standard crucible size(High * diameter) : 10mm*φ6mm。
- Replaceable support, convenient for disassembly and cleaning, and can be replaced with crucible of different specifications
- Machine size: 70cm*44cm*42 cm, 50kg (82*58*66cm, 70kg, with the outer packing).
Configuration list:
- Thermogravimetric analysis – 1set
- Ceramic crucibles（Φ6mm*10mm）– 50pcs
- Power cords and a Ethernet cable — 1set
- CD (contains software and operations video) — 1pcs
- Software-key —- 1pcs
- Oxygen tube, nitrogen airway tube and exhaust tube—each 5meter
- Operation manual — 1pcs
- Standard sample—（contains 1g CaC2O4·H2O and 1g CuSO4）
- Tweezer 1pcs, screwdriver1pcs and medicine spoons 1pcs
- Custom pressure reducing valve joint and quick joint 2pcs
- Fuse— 4pcs
-
DSC-BS52 Differential scanning calorimeter(DSC)
Summary:
The DSC is a touch screen type, specially testing polymer material oxidation induction period test, customer one-key operation, software automatic operation.
Conforming the following standards:
GB/T 19466.2- 2009/ISO 11357-2:1999
GB/T 19466.3- 2009/ISO 11357-3:1999
GB/T 19466.6- 2009/ISO 11357-6:1999
Features:
Industrial level widescreen touch structure is rich in information, including setting temperature, sample temperature, oxygen flow, nitrogen flow, differential thermal signal, various switch states, etc.
USB communication interface, strong universality, reliable communication, support self-restoring connection function.
The furnace structure is compact, and the rate of rising and cooling is adjustable.
The installation process is improved, and the mechanical fixation method is adopted to completely avoid the contamination of the internal colloidal of the furnace to the differential heat signal.
The furnace is heated by electric heating wire, and the furnace is cooled by circulating cooling water (refrigerated by compressor)., compact structure and small size.
The double temperature probe ensures the high repeatability of the sample temperature measurement, and adopts the special temperature control technology to control the temperature of the furnace wall to set the temperature of the sample.
The gas flow meter automatically switches between two channels of gas, with fast switching speed and short stable time.
Standard sample is provided for easy adjustment of temperature coefficient and enthalpy value coefficient.
Software support each resolution screen, automatically adjust the computer screen size curve display mode. Support laptop, desktop; Support Win2000, XP, VISTA, WIN7, WIN8, WIN10 and other operating systems.
Support user edit device operation mode according to actual needs to achieve full automation of measurement steps. The software provides dozens of instructions, and users can flexibly combine and save each instruction according to their own measurement steps. Complex operations are reduced to one-click operations.
-
YY-1000A Thermal expansion coefficient tester
Summary:
This product is suitable for measuring the expansion and shrinkage properties of metal materials, polymer materials, ceramics, glazes, refractories, glass, graphite, carbon, corundum and other materials during the process of heat roasting under high temperature. The parameters such as linear variable, linear expansion coefficient, volume expansion coefficient, rapid thermal expansion, softening temperature, sintering kinetics, glass transition temperature, phase transition, density change, sintering rate control can be measured.
Features:
- 7 inch industrial grade widescreen touch structure, display rich information, including set temperature, sample temperature, expansion displacement signal.
- Gigabit network cable communication interface, strong commonality, reliable communication without interruption, support self-recovery connection function.
- All metal furnace body, compact structure of furnace body, adjustable rate of rise and fall.
- Furnace body heating adopts silicon carbon tube heating method, compact structure, and small volume, durable.
- PID temperature control mode to control linear temperature rise of furnace body.
- The equipment adopts high temperature resistant platinum temperature sensor and high precision displacement sensor to detect the thermal expansion signal of the sample.
- The software adapts to the computer screen of each resolution and adjusts the display mode of each curve automatically according to the size of the computer screen. Support notebook, desktop; Support Windows 7, Windows 10 and other operating systems.
-
YY-PNP Leakage Detector(Microbial invasion method)
Product Introduction:
YY-PNP Leakage Detector(Microbial invasion method) is applicable for the sealing tests of soft packaging items in industries such as food, pharmaceuticals, medical devices, daily chemicals, and electronics. This equipment can conduct both positive pressure tests and negative pressure tests. Through these tests, various sealing processes and sealing performances of samples can be effectively compared and evaluated, providing scientific basis for determining relevant technical indicators. It can also test the sealing performance of samples after undergoing drop tests and pressure resistance tests. It is particularly suitable for the quantitative determination of sealing strength, creep, heat sealing quality, overall bag burst pressure, and sealing leakage performance at the sealing edges of various soft and hard metal, plastic packaging items, and aseptic packaging items formed by various heat sealing and bonding processes. It can also conduct quantitative tests on the sealing performance of various plastic anti-theft bottle caps, medical humidification bottles, metal barrels and caps, overall sealing performance of various hoses, pressure resistance strength, cap body connection strength, disengagement strength, heat sealing edge sealing strength, lacing strength, etc. of indicators; it can also evaluate and analyze the indicators such as compressive strength, burst strength, and overall sealing, pressure resistance, and burst resistance of materials used in soft packaging bags, bottle cap torque sealing indicators, bottle cap connection disengagement strength, stress strength of materials, and the sealing performance, pressure resistance, and burst resistance of the entire bottle body. Compared with traditional designs, it truly realizes intelligent testing: presetting multiple sets of test parameters can significantly improve the detection efficiency.
-
（China）YYP107A Cardboard Thickness Tester
Application Range:
Cardboard thickness tester is specially developed and produced for the thickness of paper and cardboard and some sheet materials with certain tightness characteristics. Paper and cardboard thickness testing instrument is an indispensable testing tool for paper production enterprises, packaging production enterprises and quality supervision departments.
Executive Standard
GB/T 6547，ISO3034， ISO534
-
YYP-LH-B Moving Die Rheometer
- Summary:
YYP-LH-B Moving Die Rheometer conforms to GB/T 16584 “Requirements for determination of vulcanization characteristics of rubber without rotorless vulcanization instrument”, ISO 6502 requirements and the T30, T60, T90 data required by Italian standards. It is used to determine the characteristics of unvulcanized rubber and find out the best vulcanization time of rubber compound. Adopt military quality temperature control module, wide temperature control range, high control accuracy, stability and reproducibility. No rotor vulcanization analysis system using Windows 10 operating system platform, graphical software interface, flexible data processing, modular VB programming method, test data can be exported after the test. Fully embodies the characteristics of high automation. Glass door rising cylinder drive, low noise. It can be used for mechanical properties analysis and production quality inspection of various materials in scientific research departments, colleges and universities and industrial and mining enterprises.
- Meeting Standard:
Standard：GB/T3709-2003. GB/T 16584. ASTM D 5289. ISO-6502; JIS K6300-2-2001
-
YY-3000 Natural Rubber Rapid Plastometer
The YY-3000 Rapid Plasticity Meter is used to test the fast plastic value (initial plastic value P0) and plastic retention (PRI) of natural raw and unvulcanized plastics (rubber mixes). The instrument consists of one host, one punching machine (including a cutter), one high-precision aging oven and one thickness gauge. The rapid plasticity value P0 was used to rapidly compress the cylindrical sample between two parallel compacted blocks to a fixed thickness of 1mm by the host. The test sample was kept in the compressed state for 15s to achieve the temperature balance with the parallel plate, and then a constant pressure of 100N±1N was applied to the sample and kept for 15s. At the end of this stage, the test thickness accurately measured by the observation instrument is used as a measure of plasticity. used to test the fast plastic value (initial plastic value P0) and plastic retention (PRI) of natural raw and unvulcanized plastics (rubber mixes). The instrument consists of a main machine, a punching machine (including a cutter), a high-precision aging test chamber and a thickness gauge. The rapid plasticity value P0 was used to rapidly compress the cylindrical sample between two parallel compacted blocks to a fixed thickness of 1mm by the host. The test sample was kept in the compressed state for 15s to achieve the temperature balance with the parallel plate, and then a constant pressure of 100N±1N was applied to the sample and kept for 15s. At the end of this stage, the test thickness accurately measured by the observation instrument is used as a measure of plasticity.
-
YYP203C Thin Film Thickness Tester
I.Product Introduction
YYP 203C film thickness tester is used to test the thickness of plastic film and sheet by mechanical scanning method, but empaistic film and sheet is not available.
II.Product features
- Beauty surface
- Reasonable structure design
- Easy to operate