Textile Testing Instruments
-
YYT-07B Respirator Flame Retardant Tester
The flame retardant tester for respirator is developed according to gb2626 respiratory protective equipment, which is used to test the fire resistance and flame retardant performance of respirators. The applicable standards are: gb2626 respiratory protective articles, gb19082 technical requirements for disposable medical protective clothing, gb19083 technical requirements for medical protective masks, and gb32610 technical specification for daily protective masks Yy0469 medical surgical mask,... -
YYT-07A Fabric Flame Retardant Tester
1. Ambient temperature: – 10 ℃～ 30 ℃ 2. Relative humidity: ≤ 85% 3. Power supply voltage and power: 220 V ± 10% 50 Hz, power less than 100 W 4. Touch screen display / control, touch screen related parameters: a. Size: 7 “effective display size: 15.5cm long and 8.6cm wide; b. Resolution: 480 * 480 c. Communication interface: RS232, 3.3V CMOS or TTL, serial port mode d. Storage capacity: 1g e. Using pure hardware FPGA drive display, “zero” start-up time, power on can ru... -
YY6001A Protective Clothing Cutting Ability Tester (against sharp objects)
Used for testing the performance of materials and components in the design of protective clothing. The amount of vertical (normal) force required to cut through the test specimen by cutting the blade over a fixed distance. EN ISO 13997 1. Color touch screen display, control, Chinese and English interface, menu operation mode; 2.Servo motor drive, high precision ball screw control speed; 3. Imported high precision bearings, small friction, high precision; 4. No radial swing, no runout and v... -
YYT-T453 Protective Clothing Anti-Acid And Alkali Test System
The conductivity method and automatic timing device are used to test the penetration time of the fabric protective clothing for acid and alkali chemicals. The sample is placed between the upper and lower electrode sheets, and the conductive wire is connected to the upper electrode sheet and is in contact with the upper surface of the sample. When the penetrating phenomenon occurs, the circuit is turned on and the timing stops. The instrument structure mainly includes the following parts: 1. U... -
YYT-T453 Protective clothing anti-acid and alkali test system
This instrument is specially designed to measure the liquid repellent efficiency of fabric protective clothing fabrics for acid and alkali chemicals. 1. Semi-cylindrical plexiglass transparent tank, with an inner diameter of (125±5) mm and a length of 300 mm. 2. The diameter of the injection needle hole is 0.8mm; the needle tip is flat. 3. Automatic injection system, continuous injection of 10mL reagent within 10s. 4. Automatic timing and alarm system; LED display test time, accuracy 0.1S. 5.... -
YYT-T453 Protective Clothing Acid And Alkali Resistance Test System Operation Manual
This instrument is used to test the hydrostatic pressure resistance of fabric protective clothing for acid and alkali chemicals. The hydrostatic pressure value of the fabric is used to express the resistance of the reagent through the fabric. 1. Liquid adding barrel 2. Sample clamp device 3. Liquid drain needle valve 4. Waste liquid recovery beaker Appendix E of “GB 24540-2009 Protective Clothing Acid-base Chemical Protective Clothing” 1. Test accuracy: 1Pa 2. Test range: ... -
YY6000A Glove Cutting Resistance Tester
Used for testing the strength of protective gloves and uppers. Color touch screen display control, menu operation mode.
-
YY021Q Automatic Single Yarn Strength Tester
Automatic single yarn strength tester controlled by computer, used for the determination of polyester (polyester), polyamide (nylon), polypropylene (polypropylene), cellulose fiber and other chemical fiber filament and deformation silk, cotton yarn, air spinning yarn, ring spinning yarn and other cotton yarn, BCF carpet silk, The physical indicators such as breaking strength, breaking elongation, breaking strength, breaking time, initial modulus and breaking work of single yarn such as sewing thread are compatible with Windows 7/10 32/64 computer operating system and equipped with large screen touch screen. After the machine and computer software are connected, parameters can be set on the touch screen. Also can operate on computer software, data acquisition and processing automatic output.
-
YY–UTM-01A Universal Material Testing Machine
This machine is used for metal and non-metal (including composite materials) tensile, compression, bending, shear, peeling, tearing, load, relaxation, reciprocating and other items of static performance testing analysis research, can automatically obtain REH, Rel, RP0.2, FM, RT0.5, RT0.6, RT0.65, RT0.7, RM, E and other test parameters. And according to GB, ISO, DIN, ASTM, JIS and other domestic and international standards for testing and provide data.
-
YY605B Ironing Sublimation Colour Fastness Tester
Used for testing sublimation color fastness to ironing of various textiles.
-
YY003–Button Color Fastness Tester
Used for testing the color fastness and ironing resistance of buttons.
-
YY981B Rapid Extractor For Fiber Grease
Used for rapid extraction of various fiber grease and determination of sample oil content.