YY-DH-300 Density Balance

Brief introduction:

This series of densitometer is mainly aimed at the density measurement of polymer field, excellent quality, high precision density, real-time display density value, easy to operate, save time;

Better measurement stability and reliability;

Suitable for demanding occasions.

Widely used:

Polymer, plastic, rubber, wire and cable, composite materials, packaging materials, shoes, pipes, electrical appliances, sports equipment, tires, glass industry, rocks, ores, jewelry, crops, metal materials, opportunity car parts, new materials research laboratory……

Etc.

Meeting Standard:

ASTM D792, ASTM D297, GB/T1033, GB/T2951, GB/T3850, GB/T533, HG4-1468, JIS K6268, ISO 2781, ISO 1183.

Highlight function:

The DIS function allows you to select a measurement mode for remembering steps.

Advantages:

1.Adopt the sensor from Germany directly, which has better repeatability

2.Flip free measurement, and simpler operation

3.Waterproof membrane fuselage, protect the interior fuselage avoid ooze water

4.PC material tank, abrasion resistant to fall off, anticorrosive

5.0.5 cm stainless steel suspension wire, no bending deformation, do not touch the sink with vertical lifting bar

6.Can determine the main content of binary mixture percentage %

Other functions:

1.Can measure as long as it is solid state

2.Floating body, particles, powder, sheet, wire are measured

3.Using water as medium, also can use other liquid medium

4.Has temperature compensation function

5.Configuration wind dust cover, the standard RS – 232 communication interface

6.Matching DE – 40 printer, make the measurement result automatic printing

7.Can adapt to the site, laboratory and other field

Operation procedure:

1.Under 0.000 g status display, the product into the measuring units, after being showed stable, press ENTER to memory, display the status symbol M1 change M2;

2.The product into water, after being showed stable, press ENTER to memory, the status symbol M2 disappear, triangle symbol to mark SG, is shown as the density value.

Technical Parameters: