YY357B Diaper Penetration Performance Tester

Technical Parameters:

1. Children’s Diaper Test Parameters and Dimensions

1.1. U-shaped Sample Base Parameters:

B1:  L:125±1mm  W:122±1mm

B2:  L:136±1mm  W:135±1mm

B3:  L:154±1mm  W:152±1mm

1.2 Parameters of the Standard Liquid Addition Module:

M1:  L:100±1mm  W:80±1mm

M2:  L:108±1mm  W:85±1mm

M3:  L:125±1mm  W:95±1mm

1.3 Standard Test Pressurization Module:

Y1:  L:100±1mm  W:80±1mm

Y2:  L:108±1mm  W:85±1mm

Y3:  L:125±1mm  W:95±1mm

2. Adult Diaper Test Parameters and Dimensions

2.1. U-shaped Sample Base Parameters: L:319±1mm  W:200±1mm

2.2 Parameters of the Standard Liquid Addition Module:

M1:  L:170±1mm  W:70±1mm

M2:  L:170±1mm  W:95±1mm

2.3 Standard Test Pressurization Module:

Y1:  L:170±1mm  W:70±1mm

Y2:  L:170±1mm  W:95±1mm

2. Liquid intake volume:

3.1 Baby diapers:

3.1.1 Small (S) size and below: (40±2)ml

3.1.2 Medium size (M) : (60±2)ml

3.1.3 Large (L) size and above: (80±2)ml

3.2 Baby diapers:

3.2.1 Small (S) size and below: (30±2)ml

3.2.2 Medium size (M) : (40±2)ml

3.2.3 Large (L) size and above: (50±2)ml

3.3 Adult diapers:

3.3.1: Moderate incontinence products: (100±2)ml

3.3.2: Severe incontinence products: (150±2)ml

3.4 Adult diapers:

3.4.1: Moderate incontinence products: (70±2)ml

3.4.2: Severe incontinence products: (100±2)ml

4. Pressurization pressure: 2.0±0.2 KPa, 4.0±0.2 KPa

5. Liquid addition flow rate: 480±5 ml/min (for children), 720±5ml/min (for adults)

6. Timing range: 0.00 to 9999.99 seconds

7. Heating range of the test solution: Room temperature +5℃ to 50℃

8. Power Supply: AC220V, 200W, 50Hz

9. Dimensions L×W×H: 320mm×220mm×500mm