YY815D Fabric Flame Retardant Tester (Lower 45 Angle)
Used for testing the flame retardant property of inflammable articles such as textiles, infants and children's textiles, the burning speed and intensity after ignition.
GB/T14644-2014、ASTM D 1230、16CFR 1610.
1.1.5mm thick imported brushed stainless steel, heat and smoke corrosion resistance, easy to clean;
2. The flame height adjustment adopts precision rotor flowmeter control, the flame is stable and easy to adjust;
4. Color touch screen display operation, Chinese and English interface, menu operation mode.
5. The core components adopt 32-bit multifunctional motherboard of Italy and France to process data.
6. Stepper motor motion control, burner movement is stable, accurate positioning;
7.The burner adopts B63 material processing, corrosion resistance, no deformation, no embroidery;
8.Automatic electric fire (instead of manual ignition mode);
9.Ignition time to automatically cut off the air source (instead of manual shutdown function).
1. Combustion tester: made of imported brushed stainless steel, heat and smoke corrosion resistance, but also easy to clean, box size: 370mm×220mm×350mm (L×W×H) + 10mm; The front of the test box is a heat-resistant glass observation door, which is convenient for the operator to operate and control. There are 11 evenly arranged vents with a diameter of 12.7mm behind the top of the box.
2.Sample rack: can support, fixed sample clip, so that it is inclined 45 degrees Angle, and can be adjusted according to the different thickness of the sample and the relative position of the front end of the flame.
3.Sample clip: composed of two pieces of 2.0mm thick U-shaped steel plate, the size of the frame is: 152mm×38mm, the sample is fixed in the middle of the two plates, with clamps on both sides.
4. Burner: made of 41/2 syringe needle
5.Gas: butane (chemical pure)
6. Label thread: white cotton mercerized sewing thread (11.7 Tex3)
7. Heavy hammer: mass: 30g + 5g
8. Timer: 0 ~ 99999.9s
9. Timing resolution: 0.1s
10. Igniter top distance from the sample surface distance: 8mm
11.Flow meter range: 0 ~ 60ml/min
12.The distance between the top of the burner and the tip of the flame is: 16mm, and the flame acts vertically on the surface of the sample when ignition.
13. Power supply: AC220V, 50HZ, 50W
14. Weight: 25Kg
