Zipper Testing Instruments
-
YY003–Button Color Fastness Tester
Used for testing the color fastness and ironing resistance of buttons.
-
YY101A–Integrated Zipper Strength Tester
Used for zipper flat pull, top stop, bottom stop, open end flat pull, pull head pull piece combination, pull head self-lock, socket shift, single tooth shift strength test and zipper wire, zipper ribbon, zipper sewing thread strength test.
-
YY101B–Integrated Zipper Strength Tester
Used for zipper flat pull, top stop, bottom stop, open end flat pull, pull head pull piece combination, pull head self-lock, socket shift, single tooth shift strength test and zipper wire, zipper ribbon, zipper sewing thread strength test.
-
YY-L1A Zipper Pull Light Slip Tester
Used for metal, injection molding, nylon zipper pull light slip test.
-
YY-L1B Zipper Pull Light Slip Tester
1. The shell of the machine adopts metal baking paint, beautiful and generous;
2.Fixture, mobile frame are made of stainless steel, never rust;
3.The panel is made of imported special aluminum material, metal keys, sensitive operation, not easy to damage;
-
YY-L2A Zipper Load Pull Tester
1. The zipper head fixture is specially made with built-in opening structure, which is convenient for customers to use;
2. The positioning block to ensure that the lateral pull of the clamp in the initial clamping is to ensure that the lateral clamping 100°, convenient positioning of the sample;
-
YY-L2B Zipper Load Pull Tester
Used for life test of metal, injection molding and nylon zipper under specified load and pull times
-
YY-L3A Zip Pull head Tensile Strength Tester
Used for testing tensile strength of metal, injection molding, nylon zipper metal pull head under specified deformation.
-
YY-L3B Zip Pull head Tensile Strength Tester
Used for testing tensile strength of metal, injection molding, nylon zipper metal pull head under specified deformation.
-
YY001-Button Tensile Strength Tester (pointer display)
It is mainly used for testing the stitching strength of buttons on all kinds of textiles. Fix the sample on the base, hold the button with a clamp, lift the clamp to disengage the button, and read the required tension value from the tension table. Is to define the responsibility of the garment manufacturer to ensure that buttons, buttons and fixtures are properly secured to the garment to prevent the buttons from leaving the garment and creating a risk of being swallowed by the infant. Therefore, all buttons, buttons and fasteners on garments must be tested by a button strength tester.
-
YY-L4A Zipper Torsion Tester
Used for testing the torsion resistance of pull head and pull sheet of metal, injection molding and nylon zipper.
-
YY002–Button Impact Tester
Fix the button above the impact test and release a weight from a certain height to impact the button to test the impact strength.
