YY-6005B Ross Flex Tester 

I. Introductions:

This machine is suitable for right Angle bending test of rubber products, soles, PU and other materials.

After stretching and bending the test piece, check the degree of attenuation, damage and cracking.

II.Main functions:

The sole strip test piece was installed on the ROSS torsional testing machine, so that the notch was directly above the center of the rotating shaft of the ROSS torsional testing machine. The test piece was driven by the ROSS torsional testing machine to carry out free 90-degree torsional winding on the shaft. After a certain number of tests, the length of the test piece incision was measured, and the torsional resistance of the test piece was evaluated by the growth rate of the notch.

III. Reference standard:

GB/T2099-2007, ASTM-D1052, ISO-5423, SATRA TM60, HB-T2411 and other standards.

IV.Instrument characteristics:

RThe body surface treatment: the United States dupont powder, electrostatic painting process, the curing temperature 200 ℃ to ensure long do not fade.

RLED-SLD806 display control box, menu operation mode;

RCan adjust position, inching test speed is adjustable;

RMechanical parts by the corrosion of aluminum and stainless steel structure material composition;

RPrecision drive motors, smooth operation, low noise;

RHave time counting and automatic stop function, set the test values can be automatically stop testing;

RHigh precision bearings, rotational stability, long life;

RMechanical parts by the corrosion of aluminum and stainless steel structure material composition;

RTest with one button, simple and convenient operation;

V. Technical specifications:

1. Can be measured at the same time: (12 test pieces).

2. Tortuous Angle: 90±2º.

3. Speed: 0-100r/min can be switched.

4. Controller: LED-SLD806 integrated display control function

5. Hole punch: 2.5mm

6. Test mode:Automatically stop when the test time is reached

7. Fixture features: can test the sole at the same time can test the piece

8. Zigzag shaft diameter: 10mm.

9. Sample method: sole test piece

10.Sample size: 152×25mm

11. Machine foot inch:600*380*420mm

12. Weight: 55kg.

13. Power source: AC220V,10A.

VI.Random configuration:

1. Main machine-1 set

2. Knife die–1 pcs

3. Power cable-1pcs

4. Cutting knife–1 pcs