Welcome to our websites!

YYP–HDT VICAT TESTER

Short Description:

The HDT VICAT TESTER is used to determine Heating deflection and Vicat softening temperature  of the plastic, rubber etc. thermoplastic , It is widely used in the production, research and teaching of plastic raw materials and products. The series of instruments are compact in structure, beautiful in shape, stable in quality, and have the functions of discharging odor pollution and cooling. Using advanced MCU (multi-point micro-control unit) control system, automatic measurement and control of temperature and deformation, automatic calculation of test results, can be recycled to store 10 sets of test data. This series of instruments have a variety of models to choose from: automatic LCD display, automatic measurement; micro-control can connect computers, printers, controlled by computers, test software WINDOWS Chinese (English) interface, with automatic measurement, real-time curve, data storage, printing and other functions.

Technical parameter

1. Temperature control range: room temperature to 300 degrees centigrade.

2. heating rate: 120 C /h [(12 + 1) C /6min]

50 C /h [(5 + 0.5) C /6min]

3. maximum temperature error: + 0.5 C

4. deformation measurement range: 0 ~ 10mm

5. maximum deformation measurement error: + 0.005mm

6. the accuracy of deformation measurement is: + 0.001mm

7. sample rack (test station):3, 4, 6 (optional)

8. support span: 64mm, 100mm

9. the weight of the load lever and the pressure head (needles): 71g

10. heating medium requirements: methyl silicone oil or other media specified in the standard (flash point greater than 300 degrees Celsius)

11. cooling mode: water below 150 degrees Celsius, natural cooling at 150 C.

12. has upper limit temperature setting, automatic alarm.

13. display mode: LCD display, touch screen

14. The test temperature can be displayed, the upper limit temperature can be set, the test temperature can be automatically recorded, and the heating can be stopped automatically after the temperature reaches the upper limit.

15. deformation measurement method: special high-precision digital dial gauge + automatic alarm.

16. It has an automatic smoke removal system, which can effectively inhibit the smoke emission and maintain a good indoor air environment at all times.

17. power supply voltage: 220V + 10% 10A 50Hz

18. heating power: 3kW


Product Detail

Product Tags

Product Introduction

The HDT VICAT TESTER is used to determine Heating deflection and Vicat softening temperature  of the plastic, rubber etc. thermoplastic , It is widely used in the production, research and teaching of plastic raw materials and products. The series of instruments are compact in structure, beautiful in shape, stable in quality, and have the functions of discharging odor pollution and cooling. Using advanced MCU (multi-point micro-control unit) control system, automatic measurement and control of temperature and deformation, automatic calculation of test results, can be recycled to store 10 sets of test data. This series of instruments have a variety of models to choose from: automatic LCD display, automatic measurement; micro-control can connect computers, printers, controlled by computers, test software WINDOWS Chinese (English) interface, with automatic measurement, real-time curve, data storage, printing and other functions.

Standards

The instrument meets the requirements of ISO75, ISO306, GB/T1633, GB/T1634, GB/T8802, ASTM D1525 and ASTM D648 standard.

Technical Parameter

1. Temperature control range: room temperature to 300 degrees centigrade.

2. heating rate: 120 C /h [(12 + 1) C /6min]

50 C /h [(5 + 0.5) C /6min]

3. maximum temperature error: + 0.5 C

4. deformation measurement range: 0 ~ 10mm

5. maximum deformation measurement error: + 0.005mm

6. the accuracy of deformation measurement is: + 0.001mm

7. sample rack (test station):3, 4, 6 (optional)

8. support span: 64mm, 100mm

9. the weight of the load lever and the pressure head (needles): 71g

10. heating medium requirements: methyl silicone oil or other media specified in the standard (flash point greater than 300 degrees Celsius)

11. cooling mode: water below 150 degrees Celsius, natural cooling at 150 C.

12. has upper limit temperature setting, automatic alarm.

13. display mode: LCD display, touch screen

14. The test temperature can be displayed, the upper limit temperature can be set, the test temperature can be automatically recorded, and the heating can be stopped automatically after the temperature reaches the upper limit.

15. deformation measurement method: special high-precision digital dial gauge + automatic alarm.

16. It has an automatic smoke removal system, which can effectively inhibit the smoke emission and maintain a good indoor air environment at all times.

17. power supply voltage: 220V + 10% 10A 50Hz

18. heating power: 3kW

Model Details

Model

Structure

Sample Holder(Station)

Display&Output

Temperature range

Outside Dimension(mm)

Net Weight

(Kg)

RV-300CT

Table type

4

Touch-screen/English

RT-300℃

780×550×450

100




  • Previous:
  • Next:

  • Write your message here and send it to us