I.Application:
Rubber fatigue cracking tester is used to measure the cracking properties of vulcanized rubber,
rubber shoes and other materials after repeated flexure.
II.Meeting the standard:
GB/T 13934 、GB/T 13935、GB/T 3901、GB/T 4495、 ISO 132、ISO 133
I.Application:
Rubber fatigue cracking tester is used to measure the cracking properties of vulcanized rubber,
rubber shoes and other materials after repeated flexure.
II.Meeting the standard:
GB/T 13934 、GB/T 13935、GB/T 3901、GB/T 4495、 ISO 132、ISO 133
Instruments Introduction:
This machine is suitable for cloth, paper, paint, plywood, leather, floor tile, floor, glass, metal film,
natural plastic and so on. The test method is that the rotating test material is supported by a
pair of wear wheels, and the load is specified. The wear wheel is driven when the test
material is rotating, so as to wear the test material. The wear loss weight is the weight
difference between the test material and the test material before and after the test.
Meeting the standard:
DIN-53754、53799、53109,TAPPI-T476,ASTM-D3884,ISO5470-1,GB/T5478-2008
I.Product Introduction:
Leather, artificial leather, cloth, etc., under the water on the outside, the bending action is applied
to measure the permeability resistance index of the material. Number of test pieces 1-4 Counters 4 groups, LCD, 0~ 999999,4 sets ** 90W Volume 49×45×45cm Weight 55kg Power 1 #, AC220V,
2 A.
II.Test principle:
Leather, artificial leather, cloth, etc., under the water on the outside, the bending action is applied to measure the permeability resistance index of the material.
Meeting standard:
The performance indicators meet the requirements of GB5170, 2, 3, 5, 6-95 “Basic parameter Verification method of environmental test equipment for electrical and electronic products Low temperature, high temperature, constant wet heat, alternating wet heat test equipment”
Basic environmental test procedures for electrical and electronic products Test A: Low temperature
test method GB 2423.1-89 (IEC68-2-1)
Basic environmental test procedures for electrical and electronic products Test B: High temperature
test method GB 2423.2-89 (IEC68-2-2)
Basic environmental test procedures for electrical and electronic products Test Ca: Constant wet
heat test method GB/T 2423.3-93 (IEC68-2-3)
Basic environmental test procedures for electrical and electronic products Test Da: Alternating
humidity and heat test method GB/T423.4-93(IEC68-2-30)
I.Applications:
Leather flexure testing machine is used for the flexure test of shoe upper leather and thin leather
(shoe upper leather, handbag leather, bag leather, etc.) and cloth folding back and forth.
II.Test principle
The flexibility of the leather refers to the bending of one end surface of the test piece as the inside
and the other end surface as the outside, especially the two ends of the test piece are installed on
the designed test fixture, one of the fixtures is fixed, the other fixture is reciprocated to bend the
test piece, until the test piece is damaged, record the number of bending, or after a certain number
of bending. Look at the damage.
III.Meet the standard
BS-3144, JIB-K6545, QB1873, QB2288, QB2703, GB16799-2008, QB/T2706-2005 and other
leather flexure inspection method required specifications.
Summary:
Leather color test machine in the test of dyed upper, lining leather, after friction damage and
decolorization degree, can do dry, wet friction two tests, the test method is dry or wet white wool
cloth, wrapped in the surface of the friction hammer, and then the repeated friction clip on the test bench test piece, with power off memory function
Meet the standard:
The machine meet ISO / 105, ASTM/D2054, AATCC / 8, JIS/L0849 ISO – 11640, SATRA PM173, QB/T2537 standard, etc
I.Equipment features:
This instrument fully conforms to IULTCS,TUP/36 standard, accurate, beautiful, easy to operate
and maintain, portable advantages.
II.Equipment application:
This instrument is specially used to measure the leather, hides, in order to understand the same
batch or the same package of leather in the soft and hard is uniform, can also test a single piece
of leather, each part of the soft difference.
Summary:
It is manufactured in accordance with ASTM D1148 GB/T2454HG/T 3689-2001, and its function
is to simulate the ultraviolet radiation and heat of sunlight. The sample is exposed to ultraviolet
radiation and temperature in the machine, and after a period of time, the degree of yellowing
resistance of the sample is observed. The staining gray label can be used as a reference to
determine the grade of yellowing. The product is affected by sunlight radiation during use or the
influence of the container environment during transportation, resulting in the color change of the
product.
YYP643 Salt spray corrosion test chamber with latest PID control is widely
used in
salt spray corrosion test of electroplated parts, paints, coatings, automobile
and motorcycle parts, aviation and military parts, protective layers of metal
materials,
and industrial products such as electric and electronic systems.
Melt flow Indexer (MFI) refers to the quality or melt volume of the melt through the standard die every 10 minutes at a certain temperature and load, expressed by MFR (MI) or MVR value, which can distinguish the viscous flow characteristics of thermoplastics in the molten state. It is suitable for engineering plastics such as polycarbonate, nylon, fluoroplastic and polyarylsulfone with high melting temperature, and also for plastics with low melting temperature such as polyethylene, polystyrene, polyacrylic, ABS resin and polyformaldehyde resin. Widely used in plastic raw materials, plastic production, plastic products, petrochemical and other industries and related colleges and universities, scientific research units, commodity inspection departments.
Introductions:
Rubber impact elasticity testing machine for energy 0.5J pendulum type impact elasticity testing machine, suitable for the determination of hardness between 30IRHD~85IRHD vulcanized rubber
The rebound value of the glue.
In line with GB/T1681 “vulcanized rubber resilience determination” and ISO 4662 and other standards.
The machine adopts touch screen control, high control precision, the measured data can be printed by micro printer.