Paper Packaging Tester
-
YYP 82 Internal Bond Strenth Tester
Interlayer bond strength refers to the board’s ability to resist interlayer separation and is a reflection of the paper’s internal bond ability, which is very important for processing multilayer paper and cardboard.
Low or unevenly distributed internal bonding values may cause problems for paper and cardboard when tiling in offset printing presses using adhesive inks;
High bonding strength will bring difficulty to processing and increase production cost.
-
YY-YS05 Paper Tube Crush Tester
Description:
Paper tube cruch tester is a testing instrument for testing the compressive strength of paper tubes, mainly applicable to all kinds of industrial paper tubes less than 350mm diameter, chemical fiber paper tubes, small packaging boxes and other types of small containers or honeycomb cardboard compressive strength, deformation detection, is the ideal testing equipment for paper tube production enterprises, quality testing institutions and other departments.
-
PL7-C Type Flat Paper Sample Quick Dryer
PL7-C flat-plate paper sample quick dryer, can be used with PL6 series sheet machine and former without vacuum drying, dry evenly, smooth surface and long service life, can be heated for a long time, mainly used for fiber and other flakes drying of the samples. The red integrated heating plate is used to transmit heat to the surface, and the surface is dried by stainless steel. The upper cover plate is pressed down vertically, and the pattern is uniformly stressed, heated evenly, and shiny. I... -
YYP112 Infrared Online Moisture Meter
PL7-C flat-plate paper sample quick dryer, can be used with PL6 series sheet machine and former without vacuum drying, dry evenly, smooth surface and long service life, can be heated for a long time, mainly used for fiber and other flakes drying of the samples. The red integrated heating plate is used to transmit heat to the surface, and the surface is dried by stainless steel. The upper cover plate is pressed down vertically, and the pattern is uniformly stressed, heated evenly, and shiny. I... -
YYP200 Flexo Ink Proofer
1.Control voltage: 24VDC Power: 0.5KW 2.Inking mode: pipette Ink Dropping 3.Proofing material thickness: 0.01-2mm (flexural material) 4.Proofing material size: 100x405mm 5.Printing area:90*240mm 6.Plate area: 120x405mm 7.Thickness: 1.7mm thickness: 0.3mm 8.Plate roller and net roller pressure: Through motor regulation, The pressure of the roller and the net roller is regulated by the motor and has the scale display pressure. The pressure of the roller and the net roller is regulated by the ... -
GC-7890 Ditert-butyl Peroxide Residue Detector
Introduction
Melt-blown cloth has the characteristics of small pore size, high porosity and high filtration efficiency, and is the core material of mask production. This instrument refers to GB/T 30923-2014 plastic Polypropylene (PP) Melt-blown Special Material, suitable for polypropylene as the main raw material, with di-tert-butyl peroxide (DTBP) as the reducing agent, modified polypropylene melt-blown special material.
Methods the principle
The sample is dissolved or swollen in toluene solvent containing a known amount of n-hexane as internal standard. An appropriate amount of solution was absorbed by microsampler and directly injected into gas chromatograph. Under certain conditions, gas chromatographic analysis was carried out. DTBP residue was determined by internal standard method.
-
YYP116-2 Canadian Standard Freeness Tester
Canadian Standard Freeness Tester is used for the determination of water filtration rate of water suspensions of various pulp, and expressed by the concept of freeness (CSF).The filtration rate reflects how the fibers are after pulping or finely grinding.Standard freeness measuring instrument is widely used in the pulping process of paper making industry, the establishment of paper making technology and various pulping experiments of scientific research institutes.
-
YYP123 Box Compression Strength Tester
YYP123 Universal Compression Strength Tester is professionally used to test the compression resistance property of plastic bucket, (edible oil, mineral water), fiber drum, carton, paper, cans, container barrels (IBC barrels), plastic container, plastic crate, plastic seat and other plastic container and products.
-
YYP252 Drying Oven
1: Standard large-screen LCD display, display multiple sets of data on one screen, menu-type operation interface, easy to understand and operate.
2: The fan speed control mode is adopted, which can be adjusted freely according to different experiments.
3: The self-developed air duct circulation system can automatically discharge the water vapor in the box without manual adjustment.
-
YY PL11-00 PFI Pulp Refiner
Grinding mill site consists of three main parts:
- Bowls mounted on the basis of
- Refining disc having a working surface for the blade 33 (rib)
- Systems weight distribution arm, which provides the necessary pressure grinding.
-
YYPL13 Flat Plate Paper Pattern Fast Dryer
Plate type paper sample fast dryer, can be used with no vacuum drying sheet copy machine, molding machine, dry uniform, smooth surface long service life, can be heated for a long time, mainly used for fiber and other thin flake sample drying.
It adopts infrared radiation heating, the dry surface is a fine grinding mirror, the upper cover plate is pressed vertically, the paper sample is stressed evenly, heated evenly and has luster, which is a paper sample drying equipment with high requirements on the accuracy of the paper sample test data.
-
YYPL-6C Handsheet Former(RAPID-KOETHEN)
Our this hand sheet former is applicable to research and experiments in papermaking research institutes and paper mills.
It forms pulp into a sample sheet, then puts the sample sheet on the water extractor for drying and then carries out the inspection of the physical intensity of the sample sheet to appraise the performance of the raw material of pulp and beating process specifications. Its technical indicators conform to the international & China specified standard for papermaking physical inspection equipment.
This former combines vacuum-sucking & forming, pressing, vacuum-drying into one machine, and all-electric control.